TRIO.BAS Isolator/Multistation/Multiflex

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

• 100 or 200 litres per minute flow rate model
• Battery charger via cable (110/240 Volt)
• Bluetooth for data transfer
  

               TRIO.BAS RABS ISOLATOR WITH 1 SATELLITE

268               TRIO.BAS™ RABS ISOLATOR 100 Contact with 1 Satellite

269               TRIO.BAS™ RABS ISOLATOR 100 Petri with 1 Satellite

270               TRIO.BAS™ RABS ISOLATOR 200 Contact with 1 Satellite

271               TRIO.BAS™ RABS ISOLATOR 200 Petri with 1 Satellite

• The RABS ISOLATOR and the satellites are fabricated in AISI 316 rated stainless steel
• This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP
• Main customers are pharmaceuticals, cleanrooms and biotech industries
• A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code)
• The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop
• The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer
• It is possible to work either in manual or automatic mode
• The battery is recharged by a power cable connected directly to the air sampler
• The 200 lts/min air flow reduces the operator time and the time sampling
• This air sampler allows monitoring of separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom
• The use of sterile "Daily Shift" aspirating heads reduces the risk of contamination
• The possibility to use 1/2/3 different aspirating heads allows to have 1/2/3 different culture media at the same time or the ability to sample BEFORE (at rest), DURING (in operation) and at the END of each processing cycle

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

• 100 or 200 litres per minute flow rate model
• Battery charger via cable (110/240 Volt)
• Bluetooth for data transfer
  
  

                TRIO.BAS RABS ISOLATOR WITH 1 SATELLITE PACK (*)

268K             TRIO.BAS™ RABS ISOLATOR 100 Contact with 1 Satellite PACK

269K             TRIO.BAS™ RABS ISOLATOR 100 Petri with 1 Satellite PACK

270K             TRIO.BAS™ RABS ISOLATOR 200 Contact with 1 Satellite PACK

271K             TRIO.BAS™ RABS ISOLATOR 200 Petri with 1 Satellite PACK

(*) each PACK consists of: 1 TRIO.BAS™ RABS ISOLATOR with battery charger, 1 calibration certificate, 1 s/s satellite, 1 s/s aspirating head with s/s cover head, 1 cable connection (5 mt), 1 cable for data transfer, 1 robustus medium carrying case.

• The RABS ISOLATOR and the satellites are fabricated in AISI 316 rated stainless steel
• This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP
• Main customers are pharmaceuticals, cleanrooms and biotech industries
• A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code)
• The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop
• The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer
• It is possible to work either in manual or automatic mode
• The battery is recharged by a power cable connected directly to the air sampler
• The 200 lts/min air flow reduces the operator time and the time sampling
• This air sampler allows monitoring of separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom
• The use of sterile "Daily Shift" aspirating heads reduces the risk of contamination
• The possibility to use 1/2/3 different aspirating heads allows to have 1/2/3 different culture media at the same time or the ability to sample BEFORE (at rest), DURING (in operation) and at the END of each processing cycle

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

• 100 or 200 litres per minute flow rate model
• Battery charger via cable (110/240 Volt)
• Bluetooth for data transfer

   

               TRIO.BAS RABS ISOLATOR WITH 1 SATELLITE

268               TRIO.BAS™ RABS ISOLATOR 100 Contact with 1 Satellite

269               TRIO.BAS™ RABS ISOLATOR 100 Petri with 1 Satellite

270               TRIO.BAS™ RABS ISOLATOR 200 Contact with 1 Satellite

271               TRIO.BAS™ RABS ISOLATOR 200 Petri with 1 Satellite

• The RABS ISOLATOR and the satellites are fabricated in AISI 316 rated stainless steel
• This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP
• Main customers are pharmaceuticals, cleanrooms and biotech industries
• A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code)
• The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop
• The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer
• It is possible to work either in manual or automatic mode
• The battery is recharged by a power cable connected directly to the air sampler
• The 200 lts/min air flow reduces the operator time and the time sampling
• This air sampler allows monitoring of separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom
• The use of sterile "Daily Shift" aspirating heads reduces the risk of contamination
• The possibility to use 1/2/3 different aspirating heads allows to have 1/2/3 different culture media at the same time or the ability to sample BEFORE (at rest), DURING (in operation) and at the END of each processing cycle

TRIO.BAS™ RABS ISOLATOR 100 Petri with 1 Satellite PACK

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

• 100 or 200 litres per minute flow rate model
• Battery charger via cable (110/240 Volt)
• Bluetooth for data transfer
  
               TRIO.BAS RABS ISOLATOR WITH 1 SATELLITE

268               TRIO.BAS™ RABS ISOLATOR 100 Contact with 1 Satellite

269               TRIO.BAS™ RABS ISOLATOR 100 Petri with 1 Satellite

270               TRIO.BAS™ RABS ISOLATOR 200 Contact with 1 Satellite

271               TRIO.BAS™ RABS ISOLATOR 200 Petri with 1 Satellite

• The RABS ISOLATOR and the satellites are fabricated in AISI 316 rated stainless steel
• This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP
• Main customers are pharmaceuticals, cleanrooms and biotech industries
• A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code)
• The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop
• The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer
• It is possible to work either in manual or automatic mode
• The battery is recharged by a power cable connected directly to the air sampler
• The 200 lts/min air flow reduces the operator time and the time sampling
• This air sampler allows monitoring of separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom
• The use of sterile "Daily Shift" aspirating heads reduces the risk of contamination
• The possibility to use 1/2/3 different aspirating heads allows to have 1/2/3 different culture media at the same time or the ability to sample BEFORE (at rest), DURING (in operation) and at the END of each processing cycle

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

• 100 or 200 litres per minute flow rate model
• Battery charger via cable (110/240 Volt)
• Bluetooth for data transfer
  
                TRIO.BAS RABS ISOLATOR WITH 1 SATELLITE PACK (*)

268K             TRIO.BAS™ RABS ISOLATOR 100 Contact with 1 Satellite PACK

269K             TRIO.BAS™ RABS ISOLATOR 100 Petri with 1 Satellite PACK

270K             TRIO.BAS™ RABS ISOLATOR 200 Contact with 1 Satellite PACK

271K             TRIO.BAS™ RABS ISOLATOR 200 Petri with 1 Satellite PACK

(*) each PACK consists of: 1 TRIO.BAS™ RABS ISOLATOR with battery charger, 1 calibration certificate, 1 s/s satellite, 1 s/s aspirating head with s/s cover head, 1 cable connection (5 mt), 1 cable for data transfer, 1 robustus medium carrying case.

• The RABS ISOLATOR and the satellites are fabricated in AISI 316 rated stainless steel
• This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP
• Main customers are pharmaceuticals, cleanrooms and biotech industries
• A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code)
• The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop
• The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer
• It is possible to work either in manual or automatic mode
• The battery is recharged by a power cable connected directly to the air sampler
• The 200 lts/min air flow reduces the operator time and the time sampling
• This air sampler allows monitoring of separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom
• The use of sterile "Daily Shift" aspirating heads reduces the risk of contamination
• The possibility to use 1/2/3 different aspirating heads allows to have 1/2/3 different culture media at the same time or the ability to sample BEFORE (at rest), DURING (in operation) and at the END of each processing cycle

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

The TRIO.BAS stainless steel satellites are the ideal solution for RABS and Isolator because the sampled air remains inside the cabinet and doesn’t need to be expulsed. The RABS ISOLATOR and the satellites are fabricated in AISI 316 rated stainless steel.

• This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP.
• Main customers are pharmaceuticals, cleanrooms and biotech industries.
• A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code).
• The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
• The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer.
• It is possibile to work either in manual or automatic mode.
• The battery is recharged by a power cable connected directly to the air sampler.
• The 200 lts/min air flow reduces the operator time and the time sampling.
• This air sampler allows monitoring of separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom.
• The use of sterile "Daily Shift" aspirating heads reduces the risk of contamination.
• The possibility to use 1/2/3 different aspirating heads allows to have 1/2/3 different culture media at the same time or the ability to sample BEFORE (at rest), DURING (in operation) and at the END of each processing cycle.
  
  
  

TRIO.BAS™ RABS ISOLATOR 200 Petri with 1 Satellite PACK

ROBUSTUS MEDIUM carrying case for TRIO.BAS MULTIFLEX 1+2/RABS ISOLATOR with 1-3 Satellites - 56x43x22h cm.

(*) each PACK consists of: 1 TRIO.BAS RABS ISOLATOR with battery charger, 1 calibration certificate, 1 s/s satellite, 1 s/s aspirating head (code 830) with s/s cover head (code 465), 1 cable connection (5 mt) (code 265), 1 cable for data transfer and 1 robustus medium carrying case

The GMP Annex 1 introduced news about the microbial air monitoring in Grade “A” and “B” of the cleanroom:

The paragraphs 9.22 and 9.24 of the Chapter 9 say:

9.22 Where aseptic operations are performed, microbial monitoring should be frequent using a combination of methods such as settle plates, volumetric air sampling, glove, gown and surface sampling (e.g. swabs and contact plates). The method of sampling used should @e justified within the CCS and should be demonstrated not to have a detrimental impact on grade A and B airflow patterns. Cleanroom and equipment surfaces should be monitored at the end of an operation.

9.24 Continuous viable air monitoring in grade A (e.g. air sampling or settle plates) should be undertaken for the full duration of critical processing, including equipment (aseptic set-up) assembly and critical processing. A similar approach should be considered for grade B cleanrooms based on the risk of impact on the aseptic processing. The monitoring should be performed in such a way that all interventions, transient events and any system deterioration would be captured and any risk caused by interventions of the monitoring operations is avoided.

The new generation of ORUM microbial air samplers called "CM" have been developed to follow these new indications of GMP Annex 1.